Camco Rhino RV Sewer Hose Support Breakdown: Reliable Campsite Waste Flow

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

Managing holding tanks is one of the most critical utility chores of any camping excursion, requiring a continuous downward pitch from the vehicle drain outlet to the campground sewer hookup. When a discharge line rests directly on the earth, bends and low spots develop where solids and wastewater pool, creating slow dumps and frustrating cleanups. The Camco Rhino Sewer Hose Support provides a physical foundation that elevates flexible discharge lines off rough ground while organizing the connection into a steady, gravity-assisted pathway.

Designed around five stackable sections with stepped heights, this support kit establishes an engineered slope across uneven campsite surfaces without complex mechanics. For travelers looking to streamline hookups and maintain a hygienic campsite perimeter, our assessment of the design, specifications, and manufacturer data shows that this nesting kit delivers a practical, highly packable routine solution.

Camco Rhino Sewer Hose Support Features Explained

Graduated Elevation for Consistent Flow

The core purpose of the system is creating a steady downward slope so wastewater exits quickly under gravity. Camco constructs this kit using five individual sections whose heights range incrementally from 8 1/2 inches down to 10 1/2 inches at the high point. By arranging these segments in descending sequence from the RV dump outlet toward the municipal or park connection, you create a dedicated camco rv sewer hose slope support that eliminates sag points where waste might otherwise stagnate.

Because flexible lines inherently bow when filled with water, intermediate cradling is necessary to keep flow rates optimal. The graduated profile eliminates the need to stack wood scraps, leveling blocks, or rocks underneath the hose to maintain proper grade. This built-in downward channel ensures that when you pull black and gray tank gate valves, effluent moves efficiently through the conduit without requiring manual lifting or shaking during the dump sequence.

Modular Five-Piece Nesting Construction

Storage management inside camper cargo bays is always at a premium, making the camco 43072 nesting support kit especially efficient for tight utility spaces. Rather than utilizing expanding plastic trusses or scissor-link hinges that can bind, warp, or snap under tension, this system relies on five independent rigid troughs. Each section measures 24 3/16 inches long by 9 1/2 inches wide, providing a wide, stable base that resists tipping over on rough surfaces.

When packing down camp, the pieces slot neatly inside one another in a compact nested stack. An included binding strap wraps around the nested stack to keep the segments unified, preventing loose components from shifting or rattling inside utility compartments. This simple nesting rv sewer hose support architecture cuts down packing time and removes the delicate joints that often fail on mechanically linked supports.

Universal Hose Cradle Compatibility

Campground infrastructure varies widely, making broad hardware compatibility essential for daily peace of mind. The Camco Rhino support features a 9 1/2-inch channel width contoured to accommodate standard 3-inch recreational vehicle sewer lines. It is designed to match all standard Camco hose lines, pairing seamlessly with the camco rhinoflex rv sewer hose kit, as well as the RhinoEXTREME and Revolution model lines.

The open-top cradle structure also accepts non-Camco discharge lines, provided they do not exceed 3 inches in diameter or 15 feet in total run length. Because the cradle does not lock or pinch the hose walls, ribbed tubing settles naturally along the channel without crimping, ensuring an unrestricted interior bore for smooth flow during rapid tank discharges.

UV-Stabilized All-Weather Material

Utility hardware left outside through shifting weather cycles must withstand harsh elements without degrading. Camco manufactures these support sections from a tough, UV-stabilized polymer blend finished in high-visibility orange. The UV treatment helps prevent polymer embrittlement and surface cracking caused by long-term sun exposure during extended stays at full-hookup parks.

The brushed finish and polymer formula resist moisture absorption and surface staining, allowing easy hose-downs after exposure to mud, gravel, or campground runoff. Keeping utility equipment clean is standard practice, and just as outdoor property tools like the hose hawk pro power washer help maintain residential surfaces, a quick rinse at the dump pedestal leaves these support segments ready to pack away without grime.

Specs

Camco Rhino Sewer Hose Support Pros and Cons

Pros

• Stepped elevation heights create smooth gravity drainage
• Five sections nest together for compact storage
• Lightweight design weighs only 16 ounces total
• UV-stabilized polymer withstands harsh outdoor sun exposure
• Wide 9 1/2-inch cradles fit standard 3-inch hoses
• Includes convenient strap to secure nested sections

Cons

• Limited to 15 feet of hose coverage
• Freestanding design lacks ground anchoring stakes

Best Use Cases

• Campers staying at full-hookup RV resorts where park regulations mandate elevating all sewer lines off turf and gravel.
• Navigating sloped or bumpy campsites where a rhino rv sewer hose support for uneven ground provides firm intermediate bridging.
• Extended seasonal stays where durable, sun-resistant plastic prevents support warping over weeks of exposure.
• RVers with shallow basement storage lockers who require a compact nesting rv sewer hose support profile.
• Routine tank maintenance sessions where steady camco rhinoflex sewer hose elevation speeds up black tank flushing.

Before You Buy

Before purchasing this support kit, examine your typical campsite distance requirements and hose dimensions. The system is engineered specifically as a 15 ft rv sewer hose support, utilizing its five 24 3/16-inch sections to cradle a standard 15-foot line. If your layout requires 20-foot or 25-foot hose runs to reach distant hookup pedestals, this single kit will leave the extended section unsupported unless you purchase additional support units. Furthermore, while the cradles fit standard 3-inch diameter lines, oversized specialty hoses or external insulation wraps may exceed the channel width.

It is equally important to understand what comes in the package. The box contains the set of five support sections and a storage strap. It does not include sewer hoses, bayonet connectors, cleanout elbows, or ground anchor stakes. The listing specifies the mounting type as freestanding, meaning it rests on its base rather than pinning into dirt. Although the Amazon catalog attributes include odd labeling such as “Room Type: Bedroom” and “Number of Shelves: 1”, these are standard catalog indexing errors; this is strictly an exterior RV utility accessory.

Bottom Line

The Camco Rhino support kit simplifies campsite waste management by addressing the physical challenges of gravity drainage and space-conscious packing. By replacing fragile mechanical scissor supports with five rigid, nesting polymer cradles, it creates a durable foundation that resists weather damage while establishing a clean downward slope.

For RV owners evaluating whether the system fits their travel lifestyle, it represents an uncomplicated, long-lasting investment in sanitation cleanliness. Its lightweight 16-ounce profile, robust UV protection, and broad compatibility make it a practical utility staple for keeping dump operations hygienic and efficient.

FAQ

How does the Camco Rhino sewer hose support setup work on a campsite?

Setting up the system involves unbuckling the holding strap, separating the five nesting sections, and aligning them between your RV waste outlet and the ground hookup. Place the tallest section (10 1/2 inches) closest to the camper discharge valve and step down through the remaining pieces toward the lowest section (8 1/2 inches) near the sewer inlet. Rest your 3-inch drain hose inside the open channels so gravity carries wastewater smoothly downward.

Is the Camco Rhino RV sewer hose support worth it compared to leveling blocks?

Using makeshift wooden boards or leveling blocks often leads to unstable setups where hoses can slip off, sag, or kink under the weight of surging water. This dedicated support kit provides continuous cradles shaped to hold 3-inch hoses securely, preventing spills and pooling. It packs away into a unified 16-ounce stack, saving substantial cargo weight and volume compared to carrying extra blocks for utility lines.

Can this support kit handle uneven or rocky ground?

Yes, each section features a wide 9 1/2-inch base designed to rest freestanding on uneven surfaces, dirt, or campground gravel. Because the five sections are independent rather than mechanically linked, you can adjust the spacing and angle of individual cradles to bridge dips, rocks, or mounds across irregular campsite terrain.

What sewer hose brands and models fit into these cradles?

The support is universally compatible with all Camco drain assemblies, including the RhinoFLEX, RhinoEXTREME, and Revolution lines. It also accommodates any other brand of sewer hose up to 3 inches in diameter and up to 15 feet in overall length, resting freely without pinching the hose wall.

How does the nesting design help with storage?

Unlike scissor-style supports that can tangle or expand during transit, the five rigid sections nest directly inside one another. Once nested, the assembly measures 9.6 inches deep by 10.5 inches wide by 9.6 inches high. The included strap cinches the pieces together into a single 1-pound bundle that fits easily inside small exterior compartments.