Comgrow Creality CFS Multicolor Filament Review: Who It Fits and Who Should Skip It
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comgrow creality cfs multicolor filament review covers the official upgrade kit for Creality printers. The system enables multi-color printing by connecting up to four CFS units, allowing you to print in up to 16 colors. It also supports snap-away and water-soluble support materials for cleaner finishes. The unit measures 10 by 12 by 10 inches and weighs 13.4 pounds. It includes an air-tight design with desiccants to keep filament dry. This kit is designed for users who want to expand their color palette without manual switching.
- Connects up to four units for 16-color printing
- Auto filament identification via RFID tags
- Air-tight storage with desiccants for moisture protection
- Supports snap-away and water-soluble materials
- Seamless integration with Creality Print slicer
Good fit for
You should consider this kit if you own a K1, K1 MAX, K1C, K2, or K2 Plus printer and want to print in multiple colors. The auto-switching feature saves time compared to manual filament changes. The moisture-proof storage is ideal for humid environments. If you frequently use supports, the snap-away capability reduces post-processing work. This setup suits those who want consistent, automated color changes for detailed models.
Who can skip it
Skip this if you do not own a compatible Creality printer, as it only works with the K1 series and K2 models. You must also purchase the extra upgrade kit separately for your printer. The package does not include four rolls of filament, so you need to buy spools separately. If you prefer manual control over filament selection or have a non-Creality printer, this system will not work for you.
Verdict
The Creality CFS is a practical upgrade for compatible Creality printers seeking automated multicolor printing. It simplifies color changes and protects filament quality through sealed storage.
Key specs explained for CFS
Multicolor Capacity: Up to 16 colors
This system connects four units to enable sixteen distinct colors. You can print complex models without manual filament swaps. This saves time on post-processing like painting. It suits users who want vibrant, multi-material results. Compare this to single-color systems that require manual intervention for every color change.
Compatible Printer Models: K1, K1 MAX, K1C, K2, and K2 Plus
The kit works only with specific Creality machines. You must use the extra upgrade kit on these printers. This limits your options if you own other brands. Check your printer model before buying. It ensures seamless integration with Creality Print slicer software for automatic filament mapping.
Auto Filament Identification: RFID-tagged
The system reads RFID tags to load filament data. It syncs type and color to your printer automatically. This reduces manual setup errors. You can also edit data manually for regular filaments. This feature simplifies the workflow by handling specifications without user input.
Moisture-proof Filament Storage: Air tight
The design keeps filament dry using desiccants. Moisture causes print defects like stringing or weak layers. This storage method protects your material quality. It is useful for humid environments. Compare this to open spool holders that offer no protection against air absorption.
Design and Build Overview
The listing describes the Creality CFS Multicolor Filament System as a transparent unit measuring 10 inches in width and 12 inches in height. The package size is noted as 5KG, with a total weight of 13.4 pounds. This compact footprint allows it to sit alongside your printer without consuming excessive desk space. The transparent casing lets you monitor filament levels visually. You can see when a spool is running low or if the internal mechanism is functioning correctly.
According to the listing, the system uses an air-tight design to keep filament dry. Desiccants are included to absorb moisture from the air. This protects your prints from warping or poor layer adhesion caused by damp material. The layout includes a connection hub on the back. This hub allows you to link up to four CFS units together. This modular approach lets you expand your color range to sixteen distinct hues.
The finish is simple and functional. The transparent plastic construction prioritizes visibility over aesthetic flair. You do not need to worry about complex controls on the unit itself. The system relies on auto filament identification and mapping. It syncs with your printer and slicer software. This means the physical design handles storage and feeding, while the software handles color selection. The build focuses on reliability and ease of integration into your existing Creality workflow.
Setup and Everyday Use Guide
You install this unit as an upgrade kit on compatible Creality printers, including the K1, K1 MAX, K1C, K2, and K2 Plus models. The system connects via a back hub, allowing you to link up to four CFS units for sixteen-color printing. You do not need to load the filament manually for each color change. The system handles the switching automatically based on your G-code instructions.
Daily operation relies on seamless communication between the CFS and your printer. You can use Creality Print slicer software to manage the process. When you load an RFID-tagged filament, the unit identifies its type and color, then syncs those details to your printer. For standard filaments without tags, you can enter the specifications manually. This mapping ensures the printer selects the correct material from the installed spools as the print job dictates.
The design includes an airtight compartment with desiccants to keep filament dry. This moisture-proof storage helps maintain material quality from the start of your print to the end. You also benefit from snap-away support capabilities. The system can deliver support structures in different materials, including water-soluble options. This feature allows you to remove supports easily without leaving marks on your final model. The transparent housing lets you monitor filament levels visually. You simply ensure your printer is ready for the upgrade and connect the units to begin multicolor workflows.
Check Compatibility And Filament Needs
Before you buy, verify your printer model. This kit only works with K1, K1 MAX, K1C, K2, and K2 Plus. You must use the extra upgrade kit for these machines. The system does not include filament rolls, so you need to purchase spares separately. You can choose from various PETG options in white, grey, black, or brown. Ensure your workspace has enough room for the hub and up to four units. The transparent design helps you monitor filament levels easily. Keep the desiccants fresh to maintain moisture-proof storage. This system fits well alongside other Creality upgrades if you want vibrant, multi-material results without manual swaps. It is ideal for users who want to skip post-processing painting. Check your slicer compatibility with Creality Print for seamless auto-mapping. This guide helps you decide if the sixteen-color capacity meets your creative needs.
Check before you buy
- Verify your printer is K1, K1 MAX, K1C, K2, or K2 Plus.
- Purchase separate filament rolls as the package includes none.
- Ensure you have the required extra upgrade kit for your machine.
- Confirm your slicer supports auto filament mapping for seamless operation.
Creality CFS Multicolor Filament System
Best for: Multicolor printing with compatible Creality printers
- Multicolor Capacity
- Up to 16 colors
- Features
- Multi-Color Printing
- Dimensions
- 10 × 10 × 12 inches
- Weight
- 13.4 pounds
The Creality CFS is an upgrade kit for multicolor 3D printing. It supports up to 16 colors by connecting four units. The system includes auto filament identification and mapping for seamless operation. It features moisture-proof storage with desiccants to keep filament dry. You can also print snap-away supports to avoid marks on your models. This kit works with select Creality printers.
- Supports up to 16 colors with four connected units
- Auto filament identification reads RFID tags or manual entry
- Moisture-proof design keeps filament dry with desiccants
- Enables snap-away support printing for clean models
- Requires purchase of separate filament rolls for each color
- Heavy build at 13.4 pounds
- Limited to specific Creality printer models
- You want to print with up to 16 colors
- You own a compatible Creality K-series printer
- You need moisture-proof storage for filament
- You do not own a compatible Creality printer
- You prefer to buy filament separately
- You need a lightweight accessory
Verdict: Creality CFS 16-Color Auto-Switch System fits users with compatible Creality printers who want to print in up to 16 colors without extra painting. It is a practical upgrade for multicolor projects.
Specifications side by side
| Spec | Creality CFS Multicolor Filament System |
|---|---|
| Multicolor Capacity | Up to 16 colors |
| Features | Multi-Color Printing |
| Dimensions | 10 × 10 × 12 inches |
| Weight | 13.4 pounds |
| Size | 5KG |
| Color | Transparent |
| Model | CFS |
Frequently asked questions
Does this system include filament rolls?
No, the package does not include filament. You must purchase spares separately to use the unit. The listing specifies a 5KG size, which likely refers to the packaging capacity or a bundled weight metric, but the filament itself is not provided in the box. You will need to buy compatible filaments to start printing.
What printer models are compatible?
It works only with specific Creality machines. You can use it with the K1, K1 MAX, K1C, K2, and K2 Plus models. It is designed as an upgrade kit for these printers. If you own a different brand or an older Creality model, this system will not fit or function with your equipment.
How many colors can it print at once?
The system supports up to sixteen distinct colors. It achieves this by connecting up to four individual CFS units to your printer. Each unit handles multiple spools, allowing for complex multi-color prints without manual intervention. This makes it suitable for projects requiring vibrant, varied palettes.
What are the physical dimensions of the unit?
The unit is described as measuring 10 inches in width and 12 inches in height. The total weight is listed as 13.4 pounds. The color is noted as transparent. These dimensions allow it to attach to the back hub of compatible printers without taking up excessive floor space.
Is it suitable for beginners?
It is best for users who already have compatible Creality printers and want to upgrade their capabilities. The system requires linking multiple units and managing filament spares. If you are new to 3D printing, you should first master single-color printing. This kit is a practical upgrade for experienced users seeking multicolor results.
Does it use special support materials?
Yes, the system supports snap-away and water-soluble support materials. This allows for complex geometries without damaging the main print. You can remove supports easily after printing. This feature enhances the quality of detailed models and reduces post-processing time compared to standard support removal methods.