ANYCUBIC Photon Mono 4 10K Review: Who It Fits and Who Should Skip It
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This anycubic photon mono 4 10k review covers the Anycubic Photon Mono 4, a resin 3D printer designed for high-detail output. It features a 7-inch 10K LCD screen with a 9024×5120 resolution, delivering 17×17μm pixels on the X and Y axes. This setup offers a 105% increase in precision over the Mono 2. The machine also includes a 153.4mm x 87mm x 165mm build volume. These specs define its capability to produce models with exceptional detail and dynamic richness. You get a stable LighTurbo light source to reduce layer lines. The printer uses a four-point leveling method for consistent results.
- 10K LCD screen with 9024×5120 resolution
- 153.4mm x 87mm x 165mm build volume
- Laser-engraved print platform improves adhesion
- Prints resume after power restoration
- Max print speed of 70mm/h
Good fit for
This printer suits users who need fine detail in small to medium projects. The 10K resolution is ideal for miniatures, jewelry, or dental models where 17×17μm pixels matter. The 165mm height allows for taller single prints. Beginners may appreciate the four-point leveling, which does not require repeat adjustments. The power-resume feature helps you save resin and time if the electricity cuts out. It fits desktop setups where space is limited, as the unit weighs 7.72 pounds.
Who can skip it
You should skip this model if you require mobile connectivity. The data states that Anycubic APP service is not supported for the Photon Mono 4. You cannot control or monitor prints via a smartphone app. If you need large build volumes, the standard Mono 4 offers only 165mm of height. You might prefer the Mono 4 Ultra or other options with taller frames. Also, avoid this if you expect automated leveling, as this model uses a manual four-point screw system.
Verdict
The Anycubic Photon Mono 4 is a solid choice for high-resolution resin printing, provided you do not need app support. Its 10K screen and stable light source deliver excellent surface quality for detailed models.
Key specs explained
Screen Resolution: 10K
The printer uses a 9024×5120 resolution LCD with 17×17μm pixels. This high density creates models with exceptional detail and dynamic richness. You get finer features on small figures or jewelry. It offers a 105% increase in precision compared to older Mono 2 models. If you need sharp edges and smooth surfaces, this resolution reduces visible stair-stepping on curved parts.
Build Volume: 153.4mm x 87mm x 165mm
This volume allows you to print objects up to 6.04 inches wide and 6.49 inches tall. It provides ample space for daily tasks and demanding projects. You can fit multiple small parts on the build plate at once. Compare this to smaller 1080p printers that often have tighter constraints. This size balances detail with practical print capacity for most hobbyists.
Max Print Speed: 70mm/h
The printer moves the build plate at a maximum speed of 70mm per hour. This rate is determined by the resin curing time and layer height settings. It is not a rapid production speed but focuses on quality. You should expect longer print times for large, detailed models. This speed ensures the light source has enough time to cure each layer uniformly for better accuracy.
Bed Leveling: 4-point leveling
You level the build plate using four screws at the corners. The guide suggests that after the first setup and tightening, you do not need to repeat the process. This simplifies the initial setup for beginners. It helps ensure the first layer adheres properly to the platform. Consistent leveling is critical for resin printing to prevent failed prints or poor adhesion.
Design and build details
The listing describes the Anycubic Photon Mono 4 as a gray unit measuring 10 inches wide, 15 inches long, and 15 inches tall. It weighs 7.72 pounds. This compact footprint fits easily on most desks. You can position it in small home offices without crowding the space. The solid construction suggests it remains stable during the printing process, which is critical for resin printers that rely on precise layer alignment.
According to the listing, the printer features a laser-engraved print platform 2.0. This design choice aims to improve model adhesion. Better adhesion helps mitigate lifting and warping during long prints. It also keeps the removal process simple and smooth. You benefit from fewer failed prints and easier post-processing. The four-point leveling method is another practical feature. You set the four screws once and do not need to repeat the process. This reduces setup time for beginners.
The unit includes a stable LighTurbo light source. This matrix technology provides balanced and uniform lighting. Uniform light reduces layer lines and rasterization artifacts. You get models with ultra-smooth surfaces and maximum print details. The listing notes that the Anycubic APP is not supported for this model. You must rely on local slicing software for your projects. This design keeps the hardware focused on pure printing performance without software dependencies.
Setup and everyday use
Setting up the Anycubic Photon Mono 4 involves a straightforward four-point leveling process. You adjust four screws to align the build plate. The listing notes that once you complete this initial leveling and tighten the screws, you do not need to repeat the process. This design aims to simplify the start for beginners. The printer includes a laser-engraved print platform. This surface texture improves adhesion to reduce model lifting and warping during the print cycle. It also keeps the removal of finished parts simple and smooth. For daily operation, the machine supports power loss recovery. If the electricity cuts out, the printer resumes printing from where it stopped. This feature helps you avoid wasting resin and time. You do not need to restart the entire job. The build volume of 153.4mm by 87mm by 165mm provides ample space for most standard projects. You can handle daily tasks or more demanding models within this footprint. The unit weighs 7.72 pounds and measures 10 inches wide by 10 inches deep by 15 inches tall. This compact size fits on most desks without taking up excessive room. The LighTurbo light source delivers stable and uniform lighting. This consistency reduces layer lines and rasterization, resulting in ultra-smooth surfaces. You get reliable output with each layer. Note that the Anycubic app service is not supported for this specific model. You will manage files through other means. The maximum print speed is listed at 70mm per hour. This rate balances detail and speed for high-resolution work.
Before You Buy This Printer
You must handle resin safely. This machine uses liquid photopolymer resin, which requires proper ventilation and protective gear. You need nitrile gloves and a mask to stay safe during printing and post-processing. The build volume is 153.4mm x 87mm x 165mm, so verify your models fit within these limits. The Anycubic app is not supported, meaning you will likely use third-party slicing software. You should check compatibility with your preferred slicer before purchasing. Upkeep involves cleaning the LCD screen and maintaining the build platform. The laser-engraved platform helps with adhesion, but you still need to remove prints carefully. This printer sits among 1 other resin options. It suits users who prioritize high resolution over speed. If you need larger parts, consider the taller variant. If you want app connectivity, look elsewhere. This model focuses on precision and stable lighting. You get a reliable tool for detailed work, provided you manage the resin workflow correctly.
Check before you buy
- Ensure your workspace has good ventilation for resin fumes.
- Verify your 3D models fit within the 153.4mm x 87mm x 165mm build volume.
- Confirm your slicing software works without the Anycubic app.
- Purchase nitrile gloves and a respirator mask for safety.
- Check if you need the taller 20-inch height variant.
ANYCUBIC Photon Mono 4 10K Resin Printer
Best for: High-detail resin prints under 165mm tall
- Build Volume
- 153.4mm x 87mm x 165mm
- Max Print Speed
- 70mm/h
- Bed Leveling
- 4-point leveling
- Printing Technology
- Resin, LCD
- Screen Resolution
- 10K
- Dimensions
- 10 × 10 × 15 inches
The ANYCUBIC Photon Mono 4 is a resin 3D printer featuring a 7-inch 10K LCD screen with 9024×5120 resolution. It offers a build volume of 153.4mm x 87mm x 165mm and a max print speed of 70mm/h. The LighTurbo light source ensures uniform lighting. This model suits users seeking high detail and stable prints without app connectivity.
- 10K resolution with 17×17μm pixel size for high precision
- LighTurbo matrix light source reduces layer lines
- Laser-engraved platform improves adhesion and reduces warping
- 4-point leveling requires no repeat adjustments
- Resumes printing after power restoration
- Max print speed is 70mm/h
- Build volume is 153.4mm x 87mm x 165mm
- Weight is 7.72 pounds
- You prioritize high-resolution detail over speed
- You want a printer that resumes after power loss
- You prefer manual leveling over app control
- You need a build volume larger than 165mm in height
- You require faster print speeds than 70mm/h
- You want automatic app-based leveling
Verdict: The ANYCUBIC Photon Mono 4 10K Resin Printer fits users who value high detail and stability over speed or automation. It is a solid choice for detailed miniatures and small parts.
Specifications side by side
| Spec | ANYCUBIC Photon Mono 4 10K Resin Printer |
|---|---|
| Build Volume | 153.4mm x 87mm x 165mm |
| Max Print Speed | 70mm/h |
| Bed Leveling | 4-point leveling |
| Printing Technology | Resin, LCD |
| Screen Resolution | 10K |
| Dimensions | 10 × 10 × 15 inches |
| Weight | 7.72 pounds |
| Size | Photon Mono 4 |
| Color | Gray |
| Model | Mono 4 |
Frequently asked questions
Is the ANYCUBIC Photon Mono 4 10K good for miniatures?
Yes, it is excellent for miniatures. The 10K screen resolution provides 17×17μm pixels, which captures fine details on small figures. Its build volume of 153.4mm x 87mm x 165mm accommodates most standard models. You get high precision for jewelry or detailed characters without needing larger machines.
What is the build volume of this printer?
The build volume is 153.4mm x 87mm x 165mm. This allows you to print parts up to 165mm tall. It is suitable for high-detail resin prints under this height. The compact size fits well on desks while still offering enough room for multiple small models in one print job.
Does this printer use LCD or DLP technology?
It uses LCD technology. Specifically, it features a 7-inch 10K LCD screen. This setup delivers a 9024×5120 resolution for sharp, detailed prints. You benefit from the clarity of LCD resin printing combined with the high pixel density of a 10K display for superior surface finishes.
How heavy is the ANYCUBIC Photon Mono 4?
The printer weighs 7.72 pounds. It measures 10 inches wide, 15 inches long, and 15 inches tall. This weight and footprint make it stable during printing. You can place it on most standard desks without worrying about excessive bulk or instability during the layer-by-layer curing process.
Is the Photon Mono 4 10K automated?
No, it is not fully automated. You must perform a four-point leveling process manually. This involves adjusting four screws to align the build plate. Once leveled and tightened, the machine maintains this alignment. You handle the resin pouring and part removal steps yourself for full control over the process.
Who is this printer best suited for?
It is best for users who value high detail and stability. It fits those printing miniatures and small parts where precision matters most. If you prioritize speed or automation over intricate detail, this machine may not be the right fit. It is ideal for hobbyists wanting exceptional finish quality.