ANYCUBIC Kobra S1 3D Printer Review (2026): A Spec-Based Look
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This anycubic kobra s1 3d printer review covers a CoreXY machine designed for speed and precision. It features a 250 x 250 x 250mm build volume and a maximum travel speed of 600mm/s. The printer uses LeviQ3.0 for automatic bed leveling and Z-axis compensation. A full metal hotend reaches 320℃, supporting PLA, TPU, ASA, ABS, and PETG. You get a 0.4mm nozzle included, with 0.2, 0.6, and 0.8mm options available. The system integrates with Makeronline for model access. This setup targets users who want high responsiveness without manual calibration.
- CoreXY kinematics with 600mm/s travel speed and 20000mm/s² acceleration
- 250 x 250 x 250mm build volume
- LeviQ3.0 automatic bed leveling and Z-axis compensation
- Full metal hotend up to 320℃ and 120℃ bed
Good fit for
You should consider this printer if you prioritize speed and want to avoid manual bed leveling. The CoreXY frame and high acceleration suit users printing large volumes quickly. The hotend temperature allows you to use engineering materials like ABS and ASA alongside standard PLA. If you are comfortable with firmware updates and compatibility checks, this machine offers a solid out-of-the-box experience for both beginners and experienced makers seeking precision.
Who can skip it
You should look elsewhere if you need multi-color printing immediately. The listing notes that the ACE Pro for Kobra 3 is not compatible. You must buy an upgrade kit and update firmware to use it. If you want a seamless multi-color experience without extra hardware or configuration steps, this is not the right choice. Additionally, if you require a larger build area than 250mm cubes, this unit will not meet your spatial needs.
Verdict
The Anycubic Kobra S1 is a fast, precise CoreXY printer ideal for users who value speed and automatic leveling. It suits those willing to manage compatibility details for multi-color printing.
Key specs explained
Printing Technology: CoreXY
This frame design uses two motors to drive the X and Y axes independently. You get faster movement without sacrificing stability. The system reduces vibrations during high-speed printing. This results in sharper details and cleaner edges on your models. It is a standard choice for machines that prioritize speed and precision over basic cost savings.
Max Print Speed: 600mm/s
This is the highest travel speed the print head can move. You can finish large or simple models much faster than with slower machines. The printer uses 20000mm/s² acceleration to reach this speed quickly. High speed helps when you need multiple copies of an item. It requires a stable frame to maintain quality at these rates.
Build Volume: 250 * 250 * 250mm
This defines the maximum size of the objects you can print. Each dimension is 250mm, creating a cubic workspace. You can fit most hobbyist models and functional parts inside this space. Larger items must be printed in sections and assembled. This size is common for desktop printers and balances capacity with desk footprint.
Bed Leveling: automatic
The printer handles the first step of setup for you. LeviQ3.0 technology measures the bed surface and adjusts the Z-axis automatically. You do not need to manually turn screws under the plate. This saves time and reduces failed prints caused by uneven nozzles. It makes the machine ready to use right out of the box.
Design and build overview
The listing describes the Anycubic Kobra S1 as a black machine with a CoreXY frame. This structural choice supports high-speed movement by using two motors to drive the X and Y axes. You get faster travel without sacrificing stability. The design aims to reduce vibrations during rapid printing, which helps maintain precision.
According to the listing, the printer measures 19 inches in width, 22 inches in length, and 18 inches in height. The weight is listed as 2.2 pounds. These dimensions suggest a compact footprint suitable for smaller workspaces. The relatively light weight means you can move it easily if needed, though the CoreXY structure implies internal rigidity despite the low mass figure. The black finish is standard for this class of equipment.
The build volume is 250 x 250 x 250mm, offering a cubic space for your projects. Automatic bed leveling via LeviQ3.0 technology handles the initial setup. This means you do not need to manually adjust the bed screws before every print. The system also includes automatic Z-axis compensation. This feature adjusts the nozzle height during printing to keep the first layer consistent. You can start printing immediately after unpacking, as the machine is designed to be out of the box ready. The layout prioritizes ease of use for both new and experienced users.
Setup and daily operation
The Anycubic Kobra S1 aims to reduce initial friction through its LeviQ3.0 system. This technology handles automatic bed leveling and Z-axis compensation. You do not need to manually adjust the bed screws before your first print. The machine is ready to operate straight out of the box. This setup approach suits both beginners and experienced users who want to start printing quickly.
Daily operation relies on the Kobra OS and the Makeronline model library. You can access a vast collection of free models from over 3000 designers. This one-click printing feature simplifies the workflow by removing the need to find files elsewhere. The printer supports a wide range of materials thanks to its full metal hotend. It reaches a peak temperature of 320°C, which allows you to use PLA, TPU, ASA, ABS, and PETG. The heated bed maintains a maximum temperature of 120°C for consistent adhesion.
You can choose from multiple nozzle sizes, including 0.2, 0.4, 0.6, and 0.8mm. This flexibility lets you switch between high detail and fast infill. For multi-color printing, the Kobra S1 requires the ACE Pro system. Note that the ACE Pro for Kobra 3 is not compatible. You must purchase an upgrade kit if you already own that accessory. Ensure you update to firmware v2.4.8.3 or later to unlock these features. The CoreXY frame and dual motor drive minimize vibrations during high-speed travel. This stability helps maintain precision even when the printer moves at 600mm/s.
Before you buy
The Anycubic Kobra S1 is a high-speed CoreXY printer. It fits well into the 1 options listed for 3D Printers & Laser Engravers. You should verify filament compatibility before starting. The hotend reaches 320℃ and the bed hits 120℃. This supports PLA, ABS, ASA, PETG, and TPU. You need to check nozzle sizes. Options include 0.2, 0.4, 0.6, and 0.8mm. Different materials may require specific nozzles for best results. Multi-color printing requires the ACE Pro kit. Note that the ACE Pro for Kobra 3 is not compatible. You must buy an upgrade kit if you own that older accessory. Firmware v2.4.8.3 or later unlocks extra features. Keep your machine clean. Nozzle clogs happen often. Follow the wiki guide if issues arise. Makeronline offers free models from 3000 designers. This helps you test the printer’s speed. The 250 x 250 x 250mm build volume suits most hobby projects. Ensure you have space for the 22 x 19 x 18 inch footprint.
Check before you buy
- Confirm ACE Pro kit compatibility if you want multi-color prints.
- Update firmware to v2.4.8.3 or later for full features.
- Select the correct nozzle size for your chosen filament type.
- Check Makeronline for free models to test speed and precision.
Anycubic Kobra S1 CoreXY 3D Printer
Best for: fast printing with high-temperature filaments
- Build Volume
- 250 * 250 * 250mm
- Max Print Speed
- 600mm/s
- Printing Technology
- CoreXY
- Bed Leveling
- automatic
- Printing Speed
- 600 mm/s
- Features
- Multi-Color Printing
The Anycubic Kobra S1 is a CoreXY 3D printer with a 250 x 250 x 250mm build volume. It reaches speeds of 600mm/s with 20000mm/s² acceleration. Automatic bed leveling and Z-axis compensation simplify setup. The full metal hotend hits 320°C, supporting PLA, TPU, ASA, ABS, and PETG. It includes Makeronline access for free models. This machine suits users seeking speed and precision in a standard footprint.
- CoreXY kinematics with 600mm/s travel speed
- Automatic bed leveling and Z-axis compensation
- Full metal hotend reaches 320°C peak temperature
- 120°C maximum bed temperature for various filaments
- Access to Makeronline model library
- 2.2-pound weight may limit portability
- Requires ACE Pro upgrade kit for multi-color printing
- Firmware v2.4.8.3 or later needed for full features
- You need fast printing speeds up to 600mm/s
- You print with high-temperature materials like ASA or ABS
- You want automatic bed leveling to reduce setup time
- You require built-in multi-color printing without extra hardware
- You need a build volume larger than 250mm in any dimension
- You prefer a printer that does not require firmware updates for core functions
Verdict: Anycubic Kobra S1 3D Printer delivers high-speed CoreXY performance with automatic leveling. It fits users who prioritize speed and material versatility in a standard 250mm cube.
Specifications side by side
| Spec | Anycubic Kobra S1 CoreXY 3D Printer |
|---|---|
| Build Volume | 250 * 250 * 250mm |
| Max Print Speed | 600mm/s |
| Printing Technology | CoreXY |
| Bed Leveling | automatic |
| Printing Speed | 600 mm/s |
| Features | Multi-Color Printing |
| Dimensions | 22 × 19 × 18 inches |
| Weight | 2.2 pounds |
| Size | Anycubic Kobra S1 |
| Color | black |
| Model | Anycubic Kobra S1 |
Frequently asked questions
Does the Anycubic Kobra S1 support multi-color printing?
Yes, this printer supports multi-color printing. This feature allows you to create vibrant models without manual filament swaps. It expands your creative options for complex designs. You can achieve varied color schemes directly from the machine.
What are the physical dimensions of the Anycubic Kobra S1?
The printer measures 22 inches in length, 19 inches in width, and 18 inches in height. These dimensions indicate a substantial footprint for your workspace. You should ensure you have adequate room around the machine for operation and maintenance.
How much does the Anycubic Kobra S1 weigh?
The device weighs 2.2 pounds. This lightweight specification suggests it is not a heavy industrial unit. You can likely move it with relative ease if you need to reposition your setup. It remains stable during high-speed printing operations.
Is the Anycubic Kobra S1 good for high-temperature filaments?
Yes, it is designed for fast printing with high-temperature filaments. The hotend reaches 320℃ and the bed hits 120℃. This thermal range supports materials like PLA and others that require elevated temperatures. You get versatility in your material choices.
What printing technology does the Anycubic Kobra S1 use?
It uses CoreXY technology. This frame design uses two motors to drive the X and Y axes independently. You get faster movement without sacrificing stability. The system reduces vibrations during high-speed printing, resulting in sharper details on your models.
What is the maximum printing speed of this machine?
The Anycubic Kobra S1 has a maximum printing speed of 600 mm/s. This high speed allows you to complete projects quickly. The CoreXY system supports these rapid movements while maintaining print quality. You benefit from reduced wait times for your prints.